Simple Deluxe 150W Reptile Heat Bulb and 40-108 Degrees Fahrenheit Digital Thermostat Controller Included, for Amphibian Pet & Incubating Chicken, Black

$36.49

Description

Brand: Simple Deluxe

Color: Black/Heat Bulb *1+thermostat

Features:

  • Temperature range: digital thermostat provides temperature control between 40 ° F-108 ° F (5-42 ° C). Temperature display range: 32 -140 ° F (0-60 ° C).
  • Operating instructions: simple operation, with only three buttons, you can easily switch the temperature you need or unit of measurement. Handy LED heating and power indicator lights allow you to see the controller’s status even in total darkness.
  • Perfect 24h heat source: heat bulb does not emit any visually detectable light, would not disturb pets sleep. 110-120V,150W, E26 lamp base. Material: ceramic, NiCrAl. To avoid scald, please wait at least 1 hour to cool down after turning off the bulb.
  • High thermal efficiency: it emits light without luminescence while keeping warm, solid ceramic original.
  • Package includes: 1-pack 150W ceramic heat lamp bulb, 1-pack digital thermostat controller.

Package Dimensions: 122x210x789

Details: Ceramic Reptile Heat Bulb:
Specifications:
Socket: E26;
Volt: AC 110-120V;
Watts: 150W;
Material: Ceramic, NiCrAl;
Diameter of heating surface: 85mm ;
Note: 1. Lamp surface temperature is too high, do not directly touch during it works; 2. Before remove it from fixture, please allow at least 1 hour for cool to avoid scald ; 3. Accidents may happen due to improper operation so please use it in a right way and avoid using in damp environment; 4. Please adjust the distance between the lamp and the pets, at least 35cm; 5. Please away from combustible or explosive materials；

Digital Thermostat Controller:
Specifications:
Temperature control range: 40℉-108°F;
Temperature display range: 32℉-140°F;
Rated Voltage: AC 120V 60Hz ;
Max Loading: 8A 1000W ;
Easy plug-in operation with LED illuminated indicator lights & three-prong ground plug. Digital thermostat can also be used to control the temperature of many other appliances as long as they don’t exceed the maximum electrical specifications stated above. Simply place the sensors in the area where the temperature needs to be controlled plug the appliance into thermostat and set the desired temperature.
Abnormal Warning: 1. If thermostat shows “E1”, it means that the actual temperature is lower than 0℃ or 32℉; 2. If thermostat shows “E2”, it means that the actual temperature is higher than 60℃ or 108℉. 3. If thermostat shows “E3”, it means that the temperature sensor is not working properly. Please re-install the sensor；

UPC: 810000173334

Related products